Nintendo Wii : WiFi Max

Welcome to the Codejunkies customer service online knowledge base!

Below are the questions that the Datel support team members are most frequently asked; simply click on a question to view the answer. If you find you still have questions after reading through, or your question was not covered by the database, contact us using the "Still Need Help" option on the navigation menu.

- Datel Technical Support Team

Q: How do I set up WiFi Max for use with my Nintendo Wii?

If you have previously installed WiFi Max, please first ensure you have uninstalled the ZDWlan software before continuing. First, unplug your WiFi Max adapter from the PC. Next, go to the Control Panel and click on the icon “Add/Remove Programs”. The ZyDAS software should be located near the bottom of your list of installed programs, and should be entitled:

ZyDAS IEEE 802.11 b+g Wireless LAN – USB

Click on the Change/Remove button to uninstall this software. This is the only component you will need to remove before reinstalling according to the steps below.

Setting Up Your WiFi Max Adapter and Installing the Associated Software

Installing your Software and Drivers:

To setup your WiFi Max adapter, first insert the disc included with WiFi Max. A Window may appear asking for which console you would like to install software. If installing WiFi Max for your Nintendo Wii, the software may also proceed with installation without this request. Choose the appropriate console if necessary, and follow the prompts in the resulting setup wizard. In most cases, the default choices should be fine for installation, but please review these options to learn more about where your software will be installed and how to access it on your Start Menu. Installation of the associated server programs (for example, Apache) are not necessary for your Wii to connect to the internet, only if you wish to create a media server for it on your PC.
After installation is complete, connect your WiFi Max Dongle to an open USB slot on your PC. Using the included docking stand is recommended, as the placement of some USB ports may make fully inserting the dongle by itself difficult. After connecting the dongle, Windows should automatically begin to install drivers for this device. If the drivers are not found automatically, look for an option in the hardware installation wizard that allows you to browse for the correct drivers. Often this will involve a choice such as “Don’t search, I will choose the driver to install”, or a button labeled “Have Disk” or “Browse”. When Browsing, you may navigate the displayed folders to find the directory containing the right driver files. These may be found on the included software CD.

To find these Drivers on the CD:

Locate “My Computer” in the browsing window, and double-click it.

Determine which drive is your CD-Rom, and Double-click it. It should be labeled WIFIMAX if it currently contains the setup CD.

Double-click the Zydas Folder.

Double-click the Drivers folder.

Some installation wizards will further require selection of the driver file, which should be labeled ZD1211U.inf. Either double-click this file to complete the driver selection, or click “OK” or “Open” to end it after selecting the correct folder in the previous step.

Configuring your WiFi Max Dongle

Once the drivers have been installed, we will start the ZyDAS Wireless Configuration Tool to prepare the WiFi Max dongle for the Wii to connect to it. Check for a ZD icon in the lower-right corner of your PC screen, near the clock. If not present, you may also open the software through the start menu by choosing:

Programs

Then ZyDAS IEEE 802.11 b+g Wireless LAN – USB

Finally ZDWlan Utility.

Please Note: If your ZDWlan Utility will not open after selecting it, you may need to install a newer version of the ZyDas Configuration Utility. Instructions for this task will be included at the end of this document.

Ensure you have selected Access Point in the Mode pulldown menu of the Wireless LAN Configuration Tool. (Click for picture)
Click on the More Settings option labeled with a 2 in the previous picture for more configuration options. This should bring up a window labeled “Access Point Settings”. (Click for picture)
Under Bridge Adapter, you should see the name of the device your PC currently uses to connect to the internet. If the wrong device is selected, or if you see “No Bridge”, click on the arrow to the right of this listing to change the selection.

Please Note: The WiFi Max adapter is not compatible with a dialup internet connection, and will not have any Dialup adapters listed under the Bridge Adapter category.
Click on the Change button near the top of the window to access the following options. Make note of the SSID and ensure that the same SSID is specified in your PSP,DS, or Wii when viewing that device’s network connection settings. This options screen will also be where you change the channel used to connect. Start with channel 1 or 6, and try to change to the other if experiencing problems with one.

Sharing your PC’s Internet Connection

In order for your Wii to connect to the internet through your PC, it may be necessary to activate sharing of your broadband internet connection. Detailed steps for performing this change will vary depending on your operating system. However, some general guidelines have been included.

Find the Network Connection Settings option for your PC. This may sometimes be accessed directly from the start menu, or through the Windows Control Panel. If not readily available in the Control Panel, try using the option to “Switch to Classic View”.

The option to enable sharing of your connection should be available when modifying the properties of your current active connection. Right-click on the active LAN or Local Area Connection and choose Properties. Check each tab for an option labeled “Enable Internet Connection Sharing for this connection” or “Allow other network users to connect through this computer's Internet connection”, and check the box next to this option.

When viewing the properties for your Local Area Connection, one of the pages should have a box labeled “Connect Using” and then contain the name of your internet adapter. Please ensure the adapter shown in this box is the same one that is specified under the Bridge Adapter box in the Wireless LAN Configuration Tool (ZD icon in your system tray).

You may also find instructions for performing this task in Windows XP in the support section at www.microsoft.com. Click on the previous link to view these instructions. If you are still unable to activate Internet Connection Sharing after following these guidelines and instructions, please contact Microsoft or your PC’s manufacturer for further assistance with that particular task.

Q: How do I connect to the Access Point on my Nintendo Wii?

To connect to your WiFi Max access point on your Nintendo Wii console, please follow the steps below. Ensure that the stand for your WiFi Max adapter has been connected directly to your PC, in the back if possible, and that the adapter is firmly seated in the stand. The stand should be placed at a height that allows for a clear line of sight to the console if possible, with the minimum amount of distance and obstacles between them.

Click the Wii button on the console main menu.
Choose Wii Settings, then Internet, then Connection Settings.
Choose a free connection that has not yet been assigned a name or settings.
Select Wireless Connection, and then Search for an Access Point.
Note: The default name for the WiFi Max Access Point will be WLAN_AP. Choose this device unless the adapter was configured with a different SSID on your PC.
Save your settings, and perform a connection test.

Q: When I try to perform a connection test on the Wii, I receive an error message.

If you have difficulty finding the access point, or receive an error when obtaining your IP address, please first ensure you are using WiFi Max on a broadband-enabled PC. WiFi Max is unfortunately not compatible with dial-up internet connections, only DSL or Cable. Next, open your ZDWlan configuration Utility on the PC. Check the lower right corner of your Desktop for a ZD icon, and double-click it to see the options for WiFi Max. If you are using WiFi Max to connect your console to the internet, your Mode should read “Access Point.” Also, click on the “More Settings” button and please ensure the following:

The SSID should match the one scanned by your PSP in infrastructure mode, or by your DS in the NDS WiFi Settings, or by your Wii when searching for an access point.

At the very bottom of the screen, there should be a pulldown menu for Bridge Adapter. Please choose your active broadband internet connection from this menu. If you have multiple options available and are unsure of the correct one, the correct adapter will be shown when viewing the properties of your Local Area Connection, described below.

In order for your Wii to connect to the internet through your PC, it may be necessary to activate sharing of your broadband internet connection. Detailed steps for performing this change will vary depending on your operating system. However, some general guidelines have been included.

Find the Network Connection Settings option for your PC. This may sometimes be accessed directly from the start menu, or through the Windows Control Panel. If not readily available in the Control Panel, try using the option to “Switch to Classic View”.

The option to enable sharing of your connection should be available when modifying the properties of your current active connection. Right-click on the active LAN or Local Area Connection and choose Properties. Check each tab for an option labeled “Enable Internet Connection Sharing for this connection” or “Allow other network users to connect through this computer's Internet connection”, and check the box next to this option.

When viewing the properties for your Local Area Connection, one of the pages should have a box labeled “Connect Using” and then contain the name of your internet adapter. Please ensure the adapter shown in this box is the same one that is specified under the Bridge Adapter box in the Wireless LAN Configuration Tool (ZD icon in your system tray).

You may also find instructions for performing this task in Windows XP in the support section at www.microsoft.com. Click on the previous link to view these instructions. If you are still unable to activate Internet Connection Sharing after following these guidelines and instructions, please contact Microsoft or your PC’s manufacturer for further assistance with that particular task.

After confirming all settings above, if you are still unable to connect it may be helpful to reset the sharing of your connection. Repeat the steps for sharing as above, but when you encounter the checkbox labeled “Allow other network users to connect through this computer's Internet connection”, click on the box to remove the check, and then select OK. Immediately afterwards, repeat the steps once again, recheck the box, and click OK again. After resharing the connection, try and connect on your Wii. Be sure your PC has finished saving the changes you have just made, and that it is not still performing any operations. (You should not see an hourglass for your mouse icon)

Certain security features on your PC may also interfere with WiFi Max properly creating a connection for your console. Try temporarily disabling any Antivirus Autoprotect features you may have enabled, as well as any Firewall protection on your PC. If you are able to connect while these programs are disabled, but not when they are enabled, this indicates these security features are the cause of your issue. Consult the documentation included with your security software or the software’s manufacturer for more information about allowing specific programs to bypass these security features so that you may use WiFi Max while they are enabled.



General CodeJunkies.com: Website Help Online Store Help Action Replay: Code Requests & Question Still Need Help: Ticket Help Check Ticket Status GameBoy Advance Action Replay Action Replay SP Action Replay DUO Action Replay +USB Cable Pokemon Questions GameCube Action Replay Max Drive & Max Drive Pro FreeLoader Nintendo DS Action Replay DS Action Replay Duo Games N Music Max Media Dock & Max Media Player WiFi Max Nintendo Wii LAN Adaptor PowerSaves & Max Media Manager Trans Mem WiFi Max PlayStation Action Replay PlayStation 2 Action Replay MAX Action Replay MAX EVO Action Replay Version 2 GameTalk & TalkNet Max Drive/EVO Drive Max Media Creator Max Memory Card Ultimate Codes X-Port PlayStation 3 Communicator / Gaming Headset Data Max PSP Action Replay Get Connected Max Media Manager Pro Max Memory Max Power WiFi Max Xbox Action Replay Xbox 360 Transfer Kit Trash Talk Wireless Adapter X-Port Still Need Help? Contact Us Check Ticket Status	Nintendo Wii : WiFi Max Welcome to the Codejunkies customer service online knowledge base! Below are the questions that the Datel support team members are most frequently asked; simply click on a question to view the answer. If you find you still have questions after reading through, or your question was not covered by the database, contact us using the "Still Need Help" option on the navigation menu. - Datel Technical Support Team Q: How do I set up WiFi Max for use with my Nintendo Wii? If you have previously installed WiFi Max, please first ensure you have uninstalled the ZDWlan software before continuing. First, unplug your WiFi Max adapter from the PC. Next, go to the Control Panel and click on the icon “Add/Remove Programs”. The ZyDAS software should be located near the bottom of your list of installed programs, and should be entitled: ZyDAS IEEE 802.11 b+g Wireless LAN – USB Click on the Change/Remove button to uninstall this software. This is the only component you will need to remove before reinstalling according to the steps below. Setting Up Your WiFi Max Adapter and Installing the Associated Software Installing your Software and Drivers: To setup your WiFi Max adapter, first insert the disc included with WiFi Max. A Window may appear asking for which console you would like to install software. If installing WiFi Max for your Nintendo Wii, the software may also proceed with installation without this request. Choose the appropriate console if necessary, and follow the prompts in the resulting setup wizard. In most cases, the default choices should be fine for installation, but please review these options to learn more about where your software will be installed and how to access it on your Start Menu. Installation of the associated server programs (for example, Apache) are not necessary for your Wii to connect to the internet, only if you wish to create a media server for it on your PC. After installation is complete, connect your WiFi Max Dongle to an open USB slot on your PC. Using the included docking stand is recommended, as the placement of some USB ports may make fully inserting the dongle by itself difficult. After connecting the dongle, Windows should automatically begin to install drivers for this device. If the drivers are not found automatically, look for an option in the hardware installation wizard that allows you to browse for the correct drivers. Often this will involve a choice such as “Don’t search, I will choose the driver to install”, or a button labeled “Have Disk” or “Browse”. When Browsing, you may navigate the displayed folders to find the directory containing the right driver files. These may be found on the included software CD. To find these Drivers on the CD: Locate “My Computer” in the browsing window, and double-click it. Determine which drive is your CD-Rom, and Double-click it. It should be labeled WIFIMAX if it currently contains the setup CD. Double-click the Zydas Folder. Double-click the Drivers folder. Some installation wizards will further require selection of the driver file, which should be labeled ZD1211U.inf. Either double-click this file to complete the driver selection, or click “OK” or “Open” to end it after selecting the correct folder in the previous step. Configuring your WiFi Max Dongle Once the drivers have been installed, we will start the ZyDAS Wireless Configuration Tool to prepare the WiFi Max dongle for the Wii to connect to it. Check for a ZD icon in the lower-right corner of your PC screen, near the clock. If not present, you may also open the software through the start menu by choosing: Programs Then ZyDAS IEEE 802.11 b+g Wireless LAN – USB Finally ZDWlan Utility. Please Note: If your ZDWlan Utility will not open after selecting it, you may need to install a newer version of the ZyDas Configuration Utility. Instructions for this task will be included at the end of this document. Ensure you have selected Access Point in the Mode pulldown menu of the Wireless LAN Configuration Tool. (Click for picture) Click on the More Settings option labeled with a 2 in the previous picture for more configuration options. This should bring up a window labeled “Access Point Settings”. (Click for picture) Under Bridge Adapter, you should see the name of the device your PC currently uses to connect to the internet. If the wrong device is selected, or if you see “No Bridge”, click on the arrow to the right of this listing to change the selection. Please Note: The WiFi Max adapter is not compatible with a dialup internet connection, and will not have any Dialup adapters listed under the Bridge Adapter category. Click on the Change button near the top of the window to access the following options. Make note of the SSID and ensure that the same SSID is specified in your PSP,DS, or Wii when viewing that device’s network connection settings. This options screen will also be where you change the channel used to connect. Start with channel 1 or 6, and try to change to the other if experiencing problems with one. Sharing your PC’s Internet Connection In order for your Wii to connect to the internet through your PC, it may be necessary to activate sharing of your broadband internet connection. Detailed steps for performing this change will vary depending on your operating system. However, some general guidelines have been included. Find the Network Connection Settings option for your PC. This may sometimes be accessed directly from the start menu, or through the Windows Control Panel. If not readily available in the Control Panel, try using the option to “Switch to Classic View”. The option to enable sharing of your connection should be available when modifying the properties of your current active connection. Right-click on the active LAN or Local Area Connection and choose Properties. Check each tab for an option labeled “Enable Internet Connection Sharing for this connection” or “Allow other network users to connect through this computer's Internet connection”, and check the box next to this option. When viewing the properties for your Local Area Connection, one of the pages should have a box labeled “Connect Using” and then contain the name of your internet adapter. Please ensure the adapter shown in this box is the same one that is specified under the Bridge Adapter box in the Wireless LAN Configuration Tool (ZD icon in your system tray). You may also find instructions for performing this task in Windows XP in the support section at www.microsoft.com. Click on the previous link to view these instructions. If you are still unable to activate Internet Connection Sharing after following these guidelines and instructions, please contact Microsoft or your PC’s manufacturer for further assistance with that particular task. Q: How do I connect to the Access Point on my Nintendo Wii? To connect to your WiFi Max access point on your Nintendo Wii console, please follow the steps below. Ensure that the stand for your WiFi Max adapter has been connected directly to your PC, in the back if possible, and that the adapter is firmly seated in the stand. The stand should be placed at a height that allows for a clear line of sight to the console if possible, with the minimum amount of distance and obstacles between them. Click the Wii button on the console main menu. Choose Wii Settings, then Internet, then Connection Settings. Choose a free connection that has not yet been assigned a name or settings. Select Wireless Connection, and then Search for an Access Point. Note: The default name for the WiFi Max Access Point will be WLAN_AP. Choose this device unless the adapter was configured with a different SSID on your PC. Save your settings, and perform a connection test. Q: When I try to perform a connection test on the Wii, I receive an error message. If you have difficulty finding the access point, or receive an error when obtaining your IP address, please first ensure you are using WiFi Max on a broadband-enabled PC. WiFi Max is unfortunately not compatible with dial-up internet connections, only DSL or Cable. Next, open your ZDWlan configuration Utility on the PC. Check the lower right corner of your Desktop for a ZD icon, and double-click it to see the options for WiFi Max. If you are using WiFi Max to connect your console to the internet, your Mode should read “Access Point.” Also, click on the “More Settings” button and please ensure the following: The SSID should match the one scanned by your PSP in infrastructure mode, or by your DS in the NDS WiFi Settings, or by your Wii when searching for an access point. At the very bottom of the screen, there should be a pulldown menu for Bridge Adapter. Please choose your active broadband internet connection from this menu. If you have multiple options available and are unsure of the correct one, the correct adapter will be shown when viewing the properties of your Local Area Connection, described below. In order for your Wii to connect to the internet through your PC, it may be necessary to activate sharing of your broadband internet connection. Detailed steps for performing this change will vary depending on your operating system. However, some general guidelines have been included. Find the Network Connection Settings option for your PC. This may sometimes be accessed directly from the start menu, or through the Windows Control Panel. If not readily available in the Control Panel, try using the option to “Switch to Classic View”. The option to enable sharing of your connection should be available when modifying the properties of your current active connection. Right-click on the active LAN or Local Area Connection and choose Properties. Check each tab for an option labeled “Enable Internet Connection Sharing for this connection” or “Allow other network users to connect through this computer's Internet connection”, and check the box next to this option. When viewing the properties for your Local Area Connection, one of the pages should have a box labeled “Connect Using” and then contain the name of your internet adapter. Please ensure the adapter shown in this box is the same one that is specified under the Bridge Adapter box in the Wireless LAN Configuration Tool (ZD icon in your system tray). You may also find instructions for performing this task in Windows XP in the support section at www.microsoft.com. Click on the previous link to view these instructions. If you are still unable to activate Internet Connection Sharing after following these guidelines and instructions, please contact Microsoft or your PC’s manufacturer for further assistance with that particular task. After confirming all settings above, if you are still unable to connect it may be helpful to reset the sharing of your connection. Repeat the steps for sharing as above, but when you encounter the checkbox labeled “Allow other network users to connect through this computer's Internet connection”, click on the box to remove the check, and then select OK. Immediately afterwards, repeat the steps once again, recheck the box, and click OK again. After resharing the connection, try and connect on your Wii. Be sure your PC has finished saving the changes you have just made, and that it is not still performing any operations. (You should not see an hourglass for your mouse icon) Certain security features on your PC may also interfere with WiFi Max properly creating a connection for your console. Try temporarily disabling any Antivirus Autoprotect features you may have enabled, as well as any Firewall protection on your PC. If you are able to connect while these programs are disabled, but not when they are enabled, this indicates these security features are the cause of your issue. Consult the documentation included with your security software or the software’s manufacturer for more information about allowing specific programs to bypass these security features so that you may use WiFi Max while they are enabled.